No products were found matching your selection.
Other Related Products
-
A double sided tape specification should define construction, adhesive system, total thickness, release liner, peel adhesion, tack, static shear, and the conditions behind each result. It covers PET-, tissue-, foam-, and transfer-type tapes. Because surface, dwell, load, equipment, and environment can change performance, sample qualification is recommended before use.
-
- Material: Closed cell PVC foam
- Color: Black, grey, white, or custom
- Thickness: 1 mm-15 mm typical
- Width: 5 mm-1000 mm slit rolls
- Adhesive: Single sided acrylic PSA
- Use: Frame,cabinet, and equipment gap sealing
-
- Width: 1/2 inch, 3/4 inch, 1 inch
- Length: 7.5 ft, 15 ft, bulk roll
- Color: black or dark gray
- Material: heat-resistant fiber
- Backing: self adhesive liner
- Use: grill lid and door seal
-
- Material: Closed-cell EVA foam with pressure-sensitive adhesive
- Common Thickness: 1 mm, 2 mm, 3 mm, 5 mm, or made-to-size thickness
- Color Options: Black, white, gray, or customized color
- Adhesive: Rubber, hot melt, or acrylic adhesive by surface requirement
- Supply Form: Slit rolls, foam strips, die-cut pads, or shaped pieces
- Main Use: Cushioning, shock absorption, edge protection, and packaging protection
-
- Thickness: 2.3 mm, typical tolerance +/-0.20 mm
- Color: Gray acrylic foam core, red PE liner
- Material: Acrylic foam core with acrylic PSA
- Regular Size: 610 mm x 16.5 m reference roll
- Processing: Slitting, die cutting, kiss-cut strips, pads
- Testing: 24-72 hour dwell check before bulk use
-
- Common sizes: 6 mm-900 mm slit width, roll or die-cut form
- Color: water-clear tape with red PE release liner
- Material: clear acrylic adhesive with high-bond mounting structure
- Thickness options: 0.25 mm, 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Bonding surfaces: glass, metal, acrylic, polycarbonate, coated panels
- Applications: signage, transparent panels, display parts, metal trims
-
An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
-
- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-
- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
