Nitrile Rubber Insulation Tape

Double Seal Tape Company manufactures Nitrile Rubber Insulation Tape for hot and cold pipe wrapping, valves, elbows, short pipe runs, ducting, and HVAC or refrigeration fittings where condensation control matters. Made from nitrile rubber elastomeric closed-cell foam with self-adhesive backing, it helps reduce heat transfer, surface sweating, and moisture exposure around irregular insulation points. This tape is built for mechanical insulation work, not for electrical PVC tape, packaging tape, or general rubber adhesive tape.

Product Video

Product Packaging

Product Overview

This closed-cell elastomeric insulation tape is made for the small areas where pre-formed pipe insulation does not sit neatly. Around valves, elbows, tee joints, duct seams, insulation cut edges, and short pipe runs, even a small exposed section can become a cold bridge or a sweating point. The flexible nitrile rubber foam wraps closely around these shapes, helping insulation work look cleaner and perform more consistently after cutting, joining, or repair.

As a manufacturer, Double Seal Tape Company focuses on practical field use: stable foam density, clean roll edges, reliable adhesive coating, and thickness options that match common HVAC and refrigeration fitting work. The tape is not just a sticky strip. It is a self-adhesive pipe insulation tape designed to add thermal coverage, moisture resistance, and grease resistance in mechanical rooms, cold pipe areas, and refrigeration service spaces. Typical thermal conductivity is around 0.034-0.038 W/m.K, giving the material useful insulation support for both chilled and heated pipe sections.

Benefits

• Helps reduce condensation by limiting direct contact between humid indoor air and cold pipe surfaces.
• Self-adhesive backing allows faster wrapping around elbows, valves, and duct edges without brushing contact adhesive onto every small fitting.
• Typical peel adhesion can reach >=12 N/25mm on clean, dry test surfaces, helping the tape stay in place during wrapping and fitting coverage.
• Closed-cell nitrile rubber foam helps resist moisture absorption, with typical water absorption controlled at <=5% under reference production testing.
• Grease-resistant foam is suitable for mechanical rooms, refrigeration fittings, and areas exposed to light oil mist or maintenance residue.
• 3mm thickness works well for tight fittings, light wrapping, and joint coverage, while 6mm gives more insulation thickness for colder sections or higher condensation-risk areas.

Where does nitrile rubber insulation tape work better than pre-formed pipe insulation?

It works best where pipe tubes are too rigid, too long, or too difficult to shape cleanly. Valves, elbows, tee joints, duct seams, insulation cut edges, and refrigeration fittings often leave small gaps after standard insulation is installed. Wrapping these details with flexible insulation tape helps reduce cold bridges and improves insulation continuity around mechanical connections. For field installation, a firm overlap and a clean, dry surface help the adhesive bond more consistently around curved fittings.

Applications

• Hot and cold water pipe wrapping where heat loss or surface sweating needs to be reduced
• Refrigeration line joints, exposed fitting areas, and repair sections after pipe insulation is cut
• HVAC chilled water pipes, air-conditioning pipe sections, and indoor cold pipe surfaces
• Valves, elbows, tee joints, short pipe runs, and curved mechanical fittings
• Duct seams, duct edges, small access areas, and insulation touch-up points
• Condensation control around fittings where standard insulation tubes leave small gaps

Product Production

TDS

Loading Container

How does closed-cell nitrile rubber help prevent condensation?

Condensation forms when humid air reaches a pipe surface that is colder than the surrounding dew point. Closed-cell nitrile rubber foam helps slow heat transfer and limits moisture movement through the insulation layer, so the cold surface is less exposed to surrounding air. When the tape is wrapped tightly around pipes, valves, elbows, or duct connections, it works as an anti-condensation pipe wrapping tape for small but important exposed areas. For tight fittings or light joint coverage, 3mm is often enough; for colder sections or humid service areas, 6mm gives more insulation thickness and better coverage.

FAQ

Is this tape the same as electrical insulation tape?

No. It is made for mechanical insulation on pipes, valves, elbows, ducting, and refrigeration fittings. It is not PVC electrical tape.

Can it be used on cold pipes to reduce condensation?

Yes. The closed-cell nitrile rubber foam helps reduce surface sweating by improving thermal insulation and limiting moisture contact with cold pipe surfaces.

What thickness should I choose?

Choose 3mm for tight fittings, short wrapping areas, and light joint coverage. Choose 6mm for colder pipe sections or areas with higher condensation risk.

What surface condition is needed before applying the tape?

The surface should be clean, dry, and free from dust, oil, grease, or loose insulation particles before applying the self-adhesive backing.