Double Coated Polyester Clear Tape

Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.

Product Video

Product Photos

Product Overview

Double Coated Polyester Clear Tape is used when the adhesive layer must bond two smooth surfaces without becoming the most visible part of the assembly. It is different from colored PET tape, foam tape, or general-purpose mounting tape because the main value is not bulk thickness or surface hiding. The focus is clear bonding, stable coating, and a cleaner appearance after lamination.

The transparent PET carrier gives the tape more control during slitting, laminating, and die-cutting. For narrow strips, clear overlays, display windows, and precision transparent parts, this support film helps reduce stretching, edge distortion, and uneven glue exposure during converting. A common construction uses a 12 um or 25 um polyester carrier with acrylic adhesive on both sides. Total tape thickness is usually selected from 0.05 mm to 0.20 mm, depending on the bonding gap, part stiffness, and the required visual result.

For glass, acrylic, PC, PET film, stainless steel, and aluminum bonding, surface preparation is just as important as tape selection. Dust, oil, fingerprints, trapped moisture, uneven roller pressure, or the wrong release liner can cause bubbles, cloudy marks, whitening, adhesive transfer, or edge lifting. Before bulk production, sample lamination with a 24-hour dwell check is recommended, especially for coated panels, printed plastic parts, or surfaces with uncertain surface energy.

Benefits

• Clear polyester film creates a cleaner bond line for transparent panels, light-colored parts, and clear overlays.
• Uniform double coating reduces local thick-thin variation, uneven glue lines, and cloudy contact areas during flat lamination.
• Acrylic adhesive gives practical bonding performance on clean glass, acrylic, PC, PET sheet, stainless steel, and aluminum surfaces.
• Typical 180-degree peel adhesion can reach 8-14 N/25 mm on stainless steel and 6-11 N/25 mm on acrylic or PC after 24 hours dwell, depending on adhesive thickness and surface condition.
• Thin PET construction supports accurate slit rolls and die-cut parts, with typical slitting tolerance of +/-0.5 mm and die-cut tolerance of +/-0.2 mm as reference values.
• PET film liner, glassine paper liner, and PE coated paper liner can be matched to release force, lamination appearance, die-cut stability, and handling stiffness.

How can clear double coated polyester tape reduce visible bond lines on flat transparent parts?

A cleaner transparent bond starts with tape construction and application method working together. The polyester carrier keeps the adhesive layer thin and stable, while balanced acrylic coating on both sides reduces local thickness marks and uneven contact. Before bonding, glass, acrylic, PC, PET film, and metal surfaces should be dry and free from dust, oil, fingerprints, and release-agent residue. During sample lamination, a rubber roller with steady 2-5 kg reference pressure can push air in one direction and reduce trapped bubbles. After 24 hours dwell, the part should be checked for edge lifting, whitening, adhesive transfer, and visible glue-line change.

TDS

Product Package

Product Production

Applications

• Transparent acrylic sheet bonding for display panels and decorative covers
• Glass-to-metal or glass-to-plastic flat surface attachment
• PC lens, PET film, and clear overlay lamination where adhesive marks must be controlled
• Nameplate, logo plate, and membrane switch assembly with a discreet bond line
• Electronic display frame bonding that requires controlled thickness and stable liner release
• Light guide plate, clear plastic panel, and flat trim fixing
• Die-cut transparent adhesive parts for appliance, automotive, and electronics assembly
• Low-visibility bonding for smooth aluminum, stainless steel, painted panel, and rigid plastic surfaces

What release liner should be selected for cleaner lamination and die-cut transparent parts?

Release liner choice affects more than peeling convenience. It can change adhesive surface smoothness, die-cut stability, handling stiffness, and the final look of the bonded part. PET film liner is often selected for clear overlays, display windows, and precision electronic parts because it gives cleaner adhesive exposure and more stable die-cutting. Glassine paper liner works well for routine slitting, roll converting, and general flat-surface bonding. PE coated paper liner gives better stiffness for wider rolls or larger die-cut pieces. For narrow transparent parts, liner release force should be checked with the real shape, because unsuitable release may cause edge lifting, adhesive stretching, or small transfer marks during assembly.

Loading Container

FAQ

1. Is Double Coated Polyester Clear Tape fully invisible after bonding?

It is designed for low-visibility bonding, but final appearance depends on surface cleanliness, tape thickness, roller pressure, dwell time, and material transparency.

2. Can this tape bond glass, acrylic, PC, and metal?

Yes. It is suitable for clean flat glass, acrylic, PC, PET film, stainless steel, and aluminum. Coated, textured, or low-surface-energy materials should be tested first.

3. Which liner is better for clear lamination?

PET film liner is usually preferred for cleaner lamination and precision die-cutting, while glassine or PE coated paper liner can suit general converting and wider roll handling.

4. Can the tape be supplied as die-cut parts?

Yes. It can be supplied as jumbo rolls, slit rolls, sheets, kiss-cut parts, or die-cut shapes. Actual tolerance should be confirmed by part size, liner type, and drawing structure.