No products were found matching your selection.

Other Related Products

  • Double Coated Tissue Adhesive Tape Acrylic

    • Material: non-woven tissue carrier with acrylic pressure-sensitive adhesive.
    • Structure: double coated acrylic tissue tape with release liner protection.
    • Thickness: 0.09-0.18 mm typical options.
    • Color: translucent white or milky white, depending on liner and adhesive grade.
    • Adhesive coat weight: 35-90 g/m2 per side, balanced for peel and shear.
    • Uses: foam lamination, nameplate bonding, PET/PC/ABS film mounting, and die-cut parts.
    Read moreDone

  • Polyurethane Foam Sealing Strip

    • Common size: 6-50 mm width, 2-12 mm thickness
    • Color: black, grey, white, or custom color
    • Material: soft open-cell polyurethane foam
    • Backing: single-side pressure-sensitive adhesive
    • Format: roll strip or cut-to-length strip
    • Use: door, window, cabinet, equipment, joint sealing
    Read moreDone

  • Double Coated Polyester Clear Tape

    • Color: Clear, made for a low-visibility adhesive line
    • Carrier: Transparent PET / polyester film
    • Adhesive: Double coated acrylic adhesive
    • Common Thickness: 0.05 mm-0.20 mm
    • Liner Options: PET film, glassine paper, PE coated paper
    • Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
    Read moreDone

  • Closed Cell Foam Tapes

    • Common thickness:1 mm-10 mm
    • Color options:Black, grey, white
    • Foam materials:SBR, EPDM, neoprene-style rubber foam
    • Structure:Closed cell, sealed-cell sponge rubber
    • Format:Rolls, strips, adhesive backed parts, die-cut gaskets
    • Use:Door, window, cabinet, panel, and metal enclosure sealing
    Read moreDone

  • Double Coated PE Foam Tape

    • Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
    • Color: white or natural PE foam
    • Material: closed-cell PE foam carrier
    • Adhesive: acrylic adhesive coated on both sides
    • Liner: glassine paper, PE coated paper, or film liner
    • Use: mounting pads, trims, panels, nameplates, glass bonding
    Read moreDone

  • Window Insulation Tape Solutions for Installation, Air Sealing and Seasonal Protection

    Double sided tape for window insulation is used when a window assembly needs film mounting, frame air sealing, glazing contact support, or temporary seasonal protection. The right choice is not based on adhesive strength alone. It depends on the frame surface, coating condition, gap depth, film tension, temperature, humidity, sunlight exposure, service time, and removal method. PVC, painted wood, aluminium, glass, and powder-coated frames can react differently after pressure and dwell time. Safer use starts with checking tape structure, adhesive behavior, foam compression, peel response, edge stability, and residue risk on the real window surface before repeated use.

    Read moreDone

  • Industrial Jumbo Roll Double Sided Tape

    • Jumbo width: 1020 mm or 1240 mm common parent roll
    • Color: White liner, kraft liner, clear or milky adhesive layer
    • Structure: Tissue, PET film, PE foam, EVA foam, or supported film
    • Adhesive: Acrylic, modified acrylic, hot melt, or solvent acrylic
    • Thickness: 80 um-300 um typical selection
    • Processing: Slitting, rewinding, lamination, kiss cutting, die cutting
    Read moreDone

  • EVA Foam Tape For Cushioning

    • Material: Closed-cell EVA foam with pressure-sensitive adhesive
    • Common Thickness: 1 mm, 2 mm, 3 mm, 5 mm, or made-to-size thickness
    • Color Options: Black, white, gray, or customized color
    • Adhesive: Rubber, hot melt, or acrylic adhesive by surface requirement
    • Supply Form: Slit rolls, foam strips, die-cut pads, or shaped pieces
    • Main Use: Cushioning, shock absorption, edge protection, and packaging protection
    Read moreDone

  • Adhesive Strips For Clothes

    • Standard strip sizes:50mm x 10mm, 60mm x 12mm
    • Pack counts:10, 20, 50 per bag / 100, 200 per box
    • Material:Pressure-sensitive acrylic adhesive with PE-coated release liner
    • Color:Transparent and skin-tone options
    • Packaging:Portable bags, retail-ready boxes, OEM cartons
    • Easy peel designensures quick application with minimal residue (<1%)
    Read moreDone