No products were found matching your selection.
Other Related Products
-


- Material: Closed cell PVC foam
- Color: Black, grey, white, or custom
- Thickness: 1 mm-15 mm typical
- Width: 5 mm-1000 mm slit rolls
- Adhesive: Single sided acrylic PSA
- Use: Frame,cabinet, and equipment gap sealing
-


- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
-


- Thickness: 1 mm, 2 mm, 3 mm, 4 mm, 6 mm
- Width: 9 mm, 10 mm, 12 mm, 15 mm, slit to size
- Color: black or white foam
- Carrier: high-density PVC foam or closed-cell PE foam
- Adhesive: double-sided acrylic PSA
- Use: security glazing bars, sash windows, glass-to-frame sealing
-


- Common size: 6-50 mm width, 2-12 mm thickness
- Color: black, grey, white, or custom color
- Material: soft open-cell polyurethane foam
- Backing: single-side pressure-sensitive adhesive
- Format: roll strip or cut-to-length strip
- Use: door, window, cabinet, equipment, joint sealing
-


- Common Sizes: 15cm x 20m, 20cm x 50m, 30cm x 100m, 500ft
- Color: White, green, black, or project-based backing color
- Backing: PET nonwoven, PP cloth, or composite fabric
- Adhesive Side: Self-adhesive or glue-compatible seam carrier
- Use Area: Commercial turf, sports field, large landscape turf
- Key Focus: Seam strength, roll flatness, water resistance
-

A double sided tape specification should define construction, adhesive system, total thickness, release liner, peel adhesion, tack, static shear, and the conditions behind each result. It covers PET-, tissue-, foam-, and transfer-type tapes. Because surface, dwell, load, equipment, and environment can change performance, sample qualification is recommended before use.
-


- Jumbo width: 1020 mm or 1240 mm common parent roll
- Color: White liner, kraft liner, clear or milky adhesive layer
- Structure: Tissue, PET film, PE foam, EVA foam, or supported film
- Adhesive: Acrylic, modified acrylic, hot melt, or solvent acrylic
- Thickness: 80 um-300 um typical selection
- Processing: Slitting, rewinding, lamination, kiss cutting, die cutting
-


- Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color: white or natural PE foam
- Material: closed-cell PE foam carrier
- Adhesive: acrylic adhesive coated on both sides
- Liner: glassine paper, PE coated paper, or film liner
- Use: mounting pads, trims, panels, nameplates, glass bonding
-


- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge