No products were found matching your selection.
Other Related Products
-
- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
-
- Thickness: 1mm and 2mm
- Color: Clear transparent
- Adhesive body: Soft gel structure
- Surface: Glass, tile, metal, acrylic
- Format: Roll, strip, pad, die-cut piece
- Feature: Washable, removable, reusable
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-
- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-
- Common Size: 48 mm x 25 m, 50 mm x 25 m, slit widths available
- Color: White cloth tape with paper or film release liner
- Backing: Cotton/polyester woven cloth backing
- Adhesive: Double-sided rubber pressure-sensitive adhesive
- Thickness: 280-420 um typical total thickness
- Use: Exhibition carpet, event carpet, entrance mats, rough surface fixing
-
- Thickness: 2.3 mm, typical tolerance +/-0.20 mm
- Color: Gray acrylic foam core, red PE liner
- Material: Acrylic foam core with acrylic PSA
- Regular Size: 610 mm x 16.5 m reference roll
- Processing: Slitting, die cutting, kiss-cut strips, pads
- Testing: 24-72 hour dwell check before bulk use
-
- Material: Closed cell neoprene sponge foam
- Color: Black, other colors on request
- Thickness: 1 mm-40 mm typical custom range
- Width: Slit to roll, strip, or gasket size
- Adhesive: Acrylic PSA or rubber PSA backing
- Format: Plain strip, adhesive-backed, die-cut, kiss-cut
-
- Common size: 2 mm – 30 mm thickness, custom slit width
- Color: black standard for industrial sealing use
- Material: closed-cell EPDM foam rubber
- Structure: plain or adhesive backed with release liner
- Function: gap filling, air leakage control, water ingress control
- Applications: doors, windows, electric cabinets, HVAC panels
-
- Width: 1/2 inch, 3/4 inch, 1 inch
- Length: 7.5 ft, 15 ft, bulk roll
- Color: black or dark gray
- Material: heat-resistant fiber
- Backing: self adhesive liner
- Use: grill lid and door seal
