No products were found matching your selection.
Other Related Products
-
- Material: Closed cell neoprene sponge foam
- Color: Black, other colors on request
- Thickness: 1 mm-40 mm typical custom range
- Width: Slit to roll, strip, or gasket size
- Adhesive: Acrylic PSA or rubber PSA backing
- Format: Plain strip, adhesive-backed, die-cut, kiss-cut
-
- Material: Nitrile rubber elastomeric closed-cell foam
- Thickness: 3mm / 6mm
- Color: Black
- Backing: Self-adhesive with release liner
- Typical Density: 55-75 kg/m3
- Use: Pipes, valves, elbows, ducting, refrigeration fittings
-
- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
-
- Standard strip sizes:50mm x 10mm, 60mm x 12mm
- Pack counts:10, 20, 50 per bag / 100, 200 per box
- Material:Pressure-sensitive acrylic adhesive with PE-coated release liner
- Color:Transparent and skin-tone options
- Packaging:Portable bags, retail-ready boxes, OEM cartons
- Easy peel designensures quick application with minimal residue (<1%)
-
- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-
- Material: Closed cell PVC foam
- Color: Black, grey, white, or custom
- Thickness: 1 mm-15 mm typical
- Width: 5 mm-1000 mm slit rolls
- Adhesive: Single sided acrylic PSA
- Use: Frame,cabinet, and equipment gap sealing
-
- Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color: white or natural PE foam
- Material: closed-cell PE foam carrier
- Adhesive: acrylic adhesive coated on both sides
- Liner: glassine paper, PE coated paper, or film liner
- Use: mounting pads, trims, panels, nameplates, glass bonding
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-
An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
