No products were found matching your selection.
Other Related Products
-
- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-
An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
-
- Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color: white or natural PE foam
- Material: closed-cell PE foam carrier
- Adhesive: acrylic adhesive coated on both sides
- Liner: glassine paper, PE coated paper, or film liner
- Use: mounting pads, trims, panels, nameplates, glass bonding
-
- Material: Closed-cell EVA foam with pressure-sensitive adhesive
- Common Thickness: 1 mm, 2 mm, 3 mm, 5 mm, or made-to-size thickness
- Color Options: Black, white, gray, or customized color
- Adhesive: Rubber, hot melt, or acrylic adhesive by surface requirement
- Supply Form: Slit rolls, foam strips, die-cut pads, or shaped pieces
- Main Use: Cushioning, shock absorption, edge protection, and packaging protection
-
- Common Sizes: 15cm x 20m, 20cm x 50m, 30cm x 100m, 500ft
- Color: White, green, black, or project-based backing color
- Backing: PET nonwoven, PP cloth, or composite fabric
- Adhesive Side: Self-adhesive or glue-compatible seam carrier
- Use Area: Commercial turf, sports field, large landscape turf
- Key Focus: Seam strength, roll flatness, water resistance
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-
A double sided tape specification should define construction, adhesive system, total thickness, release liner, peel adhesion, tack, static shear, and the conditions behind each result. It covers PET-, tissue-, foam-, and transfer-type tapes. Because surface, dwell, load, equipment, and environment can change performance, sample qualification is recommended before use.
-
- Common size: 6-50 mm width, 2-12 mm thickness
- Color: black, grey, white, or custom color
- Material: soft open-cell polyurethane foam
- Backing: single-side pressure-sensitive adhesive
- Format: roll strip or cut-to-length strip
- Use: door, window, cabinet, equipment, joint sealing
-
- Thickness: 1 mm, 2 mm, 3 mm, 4 mm, 6 mm
- Width: 9 mm, 10 mm, 12 mm, 15 mm, slit to size
- Color: black or white foam
- Carrier: high-density PVC foam or closed-cell PE foam
- Adhesive: double-sided acrylic PSA
- Use: security glazing bars, sash windows, glass-to-frame sealing
