No products were found matching your selection.

Other Related Products

  • Nitrile Rubber Insulation Tape

    • Material: Nitrile rubber elastomeric closed-cell foam
    • Thickness: 3mm / 6mm
    • Color: Black
    • Backing: Self-adhesive with release liner
    • Typical Density: 55-75 kg/m3
    • Use: Pipes, valves, elbows, ducting, refrigeration fittings
    Read moreDone

  • Double Sided Tape Specification & Technical Data

    A double sided tape specification should define construction, adhesive system, total thickness, release liner, peel adhesion, tack, static shear, and the conditions behind each result. It covers PET-, tissue-, foam-, and transfer-type tapes. Because surface, dwell, load, equipment, and environment can change performance, sample qualification is recommended before use.

    Read moreDone

  • Double Coated Polyester Clear Tape

    • Color: Clear, made for a low-visibility adhesive line
    • Carrier: Transparent PET / polyester film
    • Adhesive: Double coated acrylic adhesive
    • Common Thickness: 0.05 mm-0.20 mm
    • Liner Options: PET film, glassine paper, PE coated paper
    • Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
    Read moreDone

  • EPDM Sponge Technical Data Sheet

    An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.

    Read moreDone

  • Double Coated Tissue Adhesive Tape Acrylic

    • Material: non-woven tissue carrier with acrylic pressure-sensitive adhesive.
    • Structure: double coated acrylic tissue tape with release liner protection.
    • Thickness: 0.09-0.18 mm typical options.
    • Color: translucent white or milky white, depending on liner and adhesive grade.
    • Adhesive coat weight: 35-90 g/m2 per side, balanced for peel and shear.
    • Uses: foam lamination, nameplate bonding, PET/PC/ABS film mounting, and die-cut parts.
    Read moreDone

  • PVC Foam Gasket Tape

    • Material: Closed cell PVC foam
    • Color: Black, grey, white, or custom
    • Thickness: 1 mm-15 mm typical
    • Width: 5 mm-1000 mm slit rolls
    • Adhesive: Single sided acrylic PSA
    • Use: Frame,cabinet, and equipment gap sealing
    Read moreDone

  • Window Insulation Tape Solutions for Installation, Air Sealing and Seasonal Protection

    Double sided tape for window insulation is used when a window assembly needs film mounting, frame air sealing, glazing contact support, or temporary seasonal protection. The right choice is not based on adhesive strength alone. It depends on the frame surface, coating condition, gap depth, film tension, temperature, humidity, sunlight exposure, service time, and removal method. PVC, painted wood, aluminium, glass, and powder-coated frames can react differently after pressure and dwell time. Safer use starts with checking tape structure, adhesive behavior, foam compression, peel response, edge stability, and residue risk on the real window surface before repeated use.

    Read moreDone

  • 2.3 mm Gray Acrylic Foam Tape

    • Thickness: 2.3 mm, typical tolerance +/-0.20 mm
    • Color: Gray acrylic foam core, red PE liner
    • Material: Acrylic foam core with acrylic PSA
    • Regular Size: 610 mm x 16.5 m reference roll
    • Processing: Slitting, die cutting, kiss-cut strips, pads
    • Testing: 24-72 hour dwell check before bulk use
    Read moreDone

  • Closed Cell Neoprene Foam Strip

    • Material: Closed cell neoprene sponge foam
    • Color: Black, other colors on request
    • Thickness: 1 mm-40 mm typical custom range
    • Width: Slit to roll, strip, or gasket size
    • Adhesive: Acrylic PSA or rubber PSA backing
    • Format: Plain strip, adhesive-backed, die-cut, kiss-cut
    Read moreDone