No products were found matching your selection.
Other Related Products
-
- Material: Closed cell neoprene sponge foam
- Color: Black, other colors on request
- Thickness: 1 mm-40 mm typical custom range
- Width: Slit to roll, strip, or gasket size
- Adhesive: Acrylic PSA or rubber PSA backing
- Format: Plain strip, adhesive-backed, die-cut, kiss-cut
-
- Material: Polyurethane with nano glue.
- Thickness: The rug tape for rugs on wood floors is very thin, like 1 mm.
- Customization: Customize your own shape and size, such as Round、Triangular and so on.
- Color Options: Black or White.
-
- Common size: 6-50 mm width, 2-12 mm thickness
- Color: black, grey, white, or custom color
- Material: soft open-cell polyurethane foam
- Backing: single-side pressure-sensitive adhesive
- Format: roll strip or cut-to-length strip
- Use: door, window, cabinet, equipment, joint sealing
-
- Common sizes: 6 mm-900 mm slit width, roll or die-cut form
- Color: water-clear tape with red PE release liner
- Material: clear acrylic adhesive with high-bond mounting structure
- Thickness options: 0.25 mm, 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Bonding surfaces: glass, metal, acrylic, polycarbonate, coated panels
- Applications: signage, transparent panels, display parts, metal trims
-
Double sided tape for window insulation is used when a window assembly needs film mounting, frame air sealing, glazing contact support, or temporary seasonal protection. The right choice is not based on adhesive strength alone. It depends on the frame surface, coating condition, gap depth, film tension, temperature, humidity, sunlight exposure, service time, and removal method. PVC, painted wood, aluminium, glass, and powder-coated frames can react differently after pressure and dwell time. Safer use starts with checking tape structure, adhesive behavior, foam compression, peel response, edge stability, and residue risk on the real window surface before repeated use.
-
- Material: non-woven tissue carrier with acrylic pressure-sensitive adhesive.
- Structure: double coated acrylic tissue tape with release liner protection.
- Thickness: 0.09-0.18 mm typical options.
- Color: translucent white or milky white, depending on liner and adhesive grade.
- Adhesive coat weight: 35-90 g/m2 per side, balanced for peel and shear.
- Uses: foam lamination, nameplate bonding, PET/PC/ABS film mounting, and die-cut parts.
-
- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
-
- Thickness: 2.3 mm, typical tolerance +/-0.20 mm
- Color: Gray acrylic foam core, red PE liner
- Material: Acrylic foam core with acrylic PSA
- Regular Size: 610 mm x 16.5 m reference roll
- Processing: Slitting, die cutting, kiss-cut strips, pads
- Testing: 24-72 hour dwell check before bulk use
-
- Common Size: 48 mm x 25 m, 50 mm x 25 m, slit widths available
- Color: White cloth tape with paper or film release liner
- Backing: Cotton/polyester woven cloth backing
- Adhesive: Double-sided rubber pressure-sensitive adhesive
- Thickness: 280-420 um typical total thickness
- Use: Exhibition carpet, event carpet, entrance mats, rough surface fixing
