No products were found matching your selection.
Other Related Products
-
- Standard strip sizes:50mm x 10mm, 60mm x 12mm
- Pack counts:10, 20, 50 per bag / 100, 200 per box
- Material:Pressure-sensitive acrylic adhesive with PE-coated release liner
- Color:Transparent and skin-tone options
- Packaging:Portable bags, retail-ready boxes, OEM cartons
- Easy peel designensures quick application with minimal residue (<1%)
-
- Thickness: 2.3 mm, typical tolerance +/-0.20 mm
- Color: Gray acrylic foam core, red PE liner
- Material: Acrylic foam core with acrylic PSA
- Regular Size: 610 mm x 16.5 m reference roll
- Processing: Slitting, die cutting, kiss-cut strips, pads
- Testing: 24-72 hour dwell check before bulk use
-
An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
-
A double sided tape specification should define construction, adhesive system, total thickness, release liner, peel adhesion, tack, static shear, and the conditions behind each result. It covers PET-, tissue-, foam-, and transfer-type tapes. Because surface, dwell, load, equipment, and environment can change performance, sample qualification is recommended before use.
-
- Common Sizes: 15cm x 20m, 20cm x 50m, 30cm x 100m, 500ft
- Color: White, green, black, or project-based backing color
- Backing: PET nonwoven, PP cloth, or composite fabric
- Adhesive Side: Self-adhesive or glue-compatible seam carrier
- Use Area: Commercial turf, sports field, large landscape turf
- Key Focus: Seam strength, roll flatness, water resistance
-
- Material: Nitrile rubber elastomeric closed-cell foam
- Thickness: 3mm / 6mm
- Color: Black
- Backing: Self-adhesive with release liner
- Typical Density: 55-75 kg/m3
- Use: Pipes, valves, elbows, ducting, refrigeration fittings
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-
- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-
- Material: Closed-cell EVA foam with pressure-sensitive adhesive
- Common Thickness: 1 mm, 2 mm, 3 mm, 5 mm, or made-to-size thickness
- Color Options: Black, white, gray, or customized color
- Adhesive: Rubber, hot melt, or acrylic adhesive by surface requirement
- Supply Form: Slit rolls, foam strips, die-cut pads, or shaped pieces
- Main Use: Cushioning, shock absorption, edge protection, and packaging protection
