No products were found matching your selection.
Other Related Products
-


- Material: Closed cell neoprene sponge foam
- Color: Black, other colors on request
- Thickness: 1 mm-40 mm typical custom range
- Width: Slit to roll, strip, or gasket size
- Adhesive: Acrylic PSA or rubber PSA backing
- Format: Plain strip, adhesive-backed, die-cut, kiss-cut
-


- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
-


- Common size: 6-50 mm width, 2-12 mm thickness
- Color: black, grey, white, or custom color
- Material: soft open-cell polyurethane foam
- Backing: single-side pressure-sensitive adhesive
- Format: roll strip or cut-to-length strip
- Use: door, window, cabinet, equipment, joint sealing
-


- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-


- Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color: white or natural PE foam
- Material: closed-cell PE foam carrier
- Adhesive: acrylic adhesive coated on both sides
- Liner: glassine paper, PE coated paper, or film liner
- Use: mounting pads, trims, panels, nameplates, glass bonding
-


- Common sizes: 6 mm-900 mm slit width, roll or die-cut form
- Color: water-clear tape with red PE release liner
- Material: clear acrylic adhesive with high-bond mounting structure
- Thickness options: 0.25 mm, 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Bonding surfaces: glass, metal, acrylic, polycarbonate, coated panels
- Applications: signage, transparent panels, display parts, metal trims
-


- Width: 1/2 inch, 3/4 inch, 1 inch
- Length: 7.5 ft, 15 ft, bulk roll
- Color: black or dark gray
- Material: heat-resistant fiber
- Backing: self adhesive liner
- Use: grill lid and door seal
-


- Thickness: 1mm and 2mm
- Color: Clear transparent
- Adhesive body: Soft gel structure
- Surface: Glass, tile, metal, acrylic
- Format: Roll, strip, pad, die-cut piece
- Feature: Washable, removable, reusable
-


- Material: Closed cell PVC foam
- Color: Black, grey, white, or custom
- Thickness: 1 mm-15 mm typical
- Width: 5 mm-1000 mm slit rolls
- Adhesive: Single sided acrylic PSA
- Use: Frame,cabinet, and equipment gap sealing