No products were found matching your selection.
Other Related Products
-
- Standard strip sizes:50mm x 10mm, 60mm x 12mm
- Pack counts:10, 20, 50 per bag / 100, 200 per box
- Material:Pressure-sensitive acrylic adhesive with PE-coated release liner
- Color:Transparent and skin-tone options
- Packaging:Portable bags, retail-ready boxes, OEM cartons
- Easy peel designensures quick application with minimal residue (<1%)
-
Double sided tape for window insulation is used when a window assembly needs film mounting, frame air sealing, glazing contact support, or temporary seasonal protection. The right choice is not based on adhesive strength alone. It depends on the frame surface, coating condition, gap depth, film tension, temperature, humidity, sunlight exposure, service time, and removal method. PVC, painted wood, aluminium, glass, and powder-coated frames can react differently after pressure and dwell time. Safer use starts with checking tape structure, adhesive behavior, foam compression, peel response, edge stability, and residue risk on the real window surface before repeated use.
-
- Thickness: 2.3 mm, typical tolerance +/-0.20 mm
- Color: Gray acrylic foam core, red PE liner
- Material: Acrylic foam core with acrylic PSA
- Regular Size: 610 mm x 16.5 m reference roll
- Processing: Slitting, die cutting, kiss-cut strips, pads
- Testing: 24-72 hour dwell check before bulk use
-
- Common Size: 48 mm x 25 m, 50 mm x 25 m, slit widths available
- Color: White cloth tape with paper or film release liner
- Backing: Cotton/polyester woven cloth backing
- Adhesive: Double-sided rubber pressure-sensitive adhesive
- Thickness: 280-420 um typical total thickness
- Use: Exhibition carpet, event carpet, entrance mats, rough surface fixing
-
An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
-
- Width: 1/2 inch, 3/4 inch, 1 inch
- Length: 7.5 ft, 15 ft, bulk roll
- Color: black or dark gray
- Material: heat-resistant fiber
- Backing: self adhesive liner
- Use: grill lid and door seal
-
- Thickness: 1mm and 2mm
- Color: Clear transparent
- Adhesive body: Soft gel structure
- Surface: Glass, tile, metal, acrylic
- Format: Roll, strip, pad, die-cut piece
- Feature: Washable, removable, reusable
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-
- Material: non-woven tissue carrier with acrylic pressure-sensitive adhesive.
- Structure: double coated acrylic tissue tape with release liner protection.
- Thickness: 0.09-0.18 mm typical options.
- Color: translucent white or milky white, depending on liner and adhesive grade.
- Adhesive coat weight: 35-90 g/m2 per side, balanced for peel and shear.
- Uses: foam lamination, nameplate bonding, PET/PC/ABS film mounting, and die-cut parts.
