No products were found matching your selection.

Other Related Products

  • Window Insulation Tape Solutions for Installation, Air Sealing and Seasonal Protection

    Double sided tape for window insulation is used when a window assembly needs film mounting, frame air sealing, glazing contact support, or temporary seasonal protection. The right choice is not based on adhesive strength alone. It depends on the frame surface, coating condition, gap depth, film tension, temperature, humidity, sunlight exposure, service time, and removal method. PVC, painted wood, aluminium, glass, and powder-coated frames can react differently after pressure and dwell time. Safer use starts with checking tape structure, adhesive behavior, foam compression, peel response, edge stability, and residue risk on the real window surface before repeated use.

    Read moreDone

  • High Temp Grill Seal Tape

    • Width: 1/2 inch, 3/4 inch, 1 inch
    • Length: 7.5 ft, 15 ft, bulk roll
    • Color: black or dark gray
    • Material: heat-resistant fiber
    • Backing: self adhesive liner
    • Use: grill lid and door seal
    Read moreDone

  • Double Coated Polyester Clear Tape

    • Color: Clear, made for a low-visibility adhesive line
    • Carrier: Transparent PET / polyester film
    • Adhesive: Double coated acrylic adhesive
    • Common Thickness: 0.05 mm-0.20 mm
    • Liner Options: PET film, glassine paper, PE coated paper
    • Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
    Read moreDone

  • Closed Cell Neoprene Foam Strip

    • Material: Closed cell neoprene sponge foam
    • Color: Black, other colors on request
    • Thickness: 1 mm-40 mm typical custom range
    • Width: Slit to roll, strip, or gasket size
    • Adhesive: Acrylic PSA or rubber PSA backing
    • Format: Plain strip, adhesive-backed, die-cut, kiss-cut
    Read moreDone

  • Heavy Duty Foam Tape Jumbo Roll

    • Jumbo roll size: 1020 mm usable width, 100 m-300 m length
    • Colors: black, white, or project-based foam color
    • Material: closed-cell high-density PE foam carrier
    • Adhesive: high-tack acrylic or modified solvent acrylic PSA
    • Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
    Read moreDone

  • Double Sided Tape Specification & Technical Data

    A double sided tape specification should define construction, adhesive system, total thickness, release liner, peel adhesion, tack, static shear, and the conditions behind each result. It covers PET-, tissue-, foam-, and transfer-type tapes. Because surface, dwell, load, equipment, and environment can change performance, sample qualification is recommended before use.

    Read moreDone

  • Clear Very High Bond Tape

    • Common sizes: 6 mm-900 mm slit width, roll or die-cut form
    • Color: water-clear tape with red PE release liner
    • Material: clear acrylic adhesive with high-bond mounting structure
    • Thickness options: 0.25 mm, 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm
    • Bonding surfaces: glass, metal, acrylic, polycarbonate, coated panels
    • Applications: signage, transparent panels, display parts, metal trims
    Read moreDone

  • Closed Cell Foam Tapes

    • Common thickness:1 mm-10 mm
    • Color options:Black, grey, white
    • Foam materials:SBR, EPDM, neoprene-style rubber foam
    • Structure:Closed cell, sealed-cell sponge rubber
    • Format:Rolls, strips, adhesive backed parts, die-cut gaskets
    • Use:Door, window, cabinet, panel, and metal enclosure sealing
    Read moreDone

  • Removable Adhesive Nano Gel Tape

    • Thickness: 1mm and 2mm
    • Color: Clear transparent
    • Adhesive body: Soft gel structure
    • Surface: Glass, tile, metal, acrylic
    • Format: Roll, strip, pad, die-cut piece
    • Feature: Washable, removable, reusable
    Read moreDone