No products were found matching your selection.
Other Related Products
-
An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
-
- Common thickness:1 mm-10 mm
- Color options:Black, grey, white
- Foam materials:SBR, EPDM, neoprene-style rubber foam
- Structure:Closed cell, sealed-cell sponge rubber
- Format:Rolls, strips, adhesive backed parts, die-cut gaskets
- Use:Door, window, cabinet, panel, and metal enclosure sealing
-
- Material: non-woven tissue carrier with acrylic pressure-sensitive adhesive.
- Structure: double coated acrylic tissue tape with release liner protection.
- Thickness: 0.09-0.18 mm typical options.
- Color: translucent white or milky white, depending on liner and adhesive grade.
- Adhesive coat weight: 35-90 g/m2 per side, balanced for peel and shear.
- Uses: foam lamination, nameplate bonding, PET/PC/ABS film mounting, and die-cut parts.
-
- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
-
- Common sizes: 6 mm-900 mm slit width, roll or die-cut form
- Color: water-clear tape with red PE release liner
- Material: clear acrylic adhesive with high-bond mounting structure
- Thickness options: 0.25 mm, 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Bonding surfaces: glass, metal, acrylic, polycarbonate, coated panels
- Applications: signage, transparent panels, display parts, metal trims
-
- Thickness: 1 mm, 2 mm, 3 mm, 4 mm, 6 mm
- Width: 9 mm, 10 mm, 12 mm, 15 mm, slit to size
- Color: black or white foam
- Carrier: high-density PVC foam or closed-cell PE foam
- Adhesive: double-sided acrylic PSA
- Use: security glazing bars, sash windows, glass-to-frame sealing
-
- Common size: 6-50 mm width, 2-12 mm thickness
- Color: black, grey, white, or custom color
- Material: soft open-cell polyurethane foam
- Backing: single-side pressure-sensitive adhesive
- Format: roll strip or cut-to-length strip
- Use: door, window, cabinet, equipment, joint sealing
-
Double sided tape for window insulation is used when a window assembly needs film mounting, frame air sealing, glazing contact support, or temporary seasonal protection. The right choice is not based on adhesive strength alone. It depends on the frame surface, coating condition, gap depth, film tension, temperature, humidity, sunlight exposure, service time, and removal method. PVC, painted wood, aluminium, glass, and powder-coated frames can react differently after pressure and dwell time. Safer use starts with checking tape structure, adhesive behavior, foam compression, peel response, edge stability, and residue risk on the real window surface before repeated use.
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
