No products were found matching your selection.
Other Related Products
-
- Thickness: 1 mm, 2 mm, 3 mm, 4 mm, 6 mm
- Width: 9 mm, 10 mm, 12 mm, 15 mm, slit to size
- Color: black or white foam
- Carrier: high-density PVC foam or closed-cell PE foam
- Adhesive: double-sided acrylic PSA
- Use: security glazing bars, sash windows, glass-to-frame sealing
-
- Common sizes: 6 mm-900 mm slit width, roll or die-cut form
- Color: water-clear tape with red PE release liner
- Material: clear acrylic adhesive with high-bond mounting structure
- Thickness options: 0.25 mm, 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Bonding surfaces: glass, metal, acrylic, polycarbonate, coated panels
- Applications: signage, transparent panels, display parts, metal trims
-
- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-
- Common Size: 48 mm x 25 m, 50 mm x 25 m, slit widths available
- Color: White cloth tape with paper or film release liner
- Backing: Cotton/polyester woven cloth backing
- Adhesive: Double-sided rubber pressure-sensitive adhesive
- Thickness: 280-420 um typical total thickness
- Use: Exhibition carpet, event carpet, entrance mats, rough surface fixing
-
- Material: Closed cell PVC foam
- Color: Black, grey, white, or custom
- Thickness: 1 mm-15 mm typical
- Width: 5 mm-1000 mm slit rolls
- Adhesive: Single sided acrylic PSA
- Use: Frame,cabinet, and equipment gap sealing
-
- Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color: white or natural PE foam
- Material: closed-cell PE foam carrier
- Adhesive: acrylic adhesive coated on both sides
- Liner: glassine paper, PE coated paper, or film liner
- Use: mounting pads, trims, panels, nameplates, glass bonding
-
- Material: Polyurethane with nano glue.
- Thickness: The rug tape for rugs on wood floors is very thin, like 1 mm.
- Customization: Customize your own shape and size, such as Round、Triangular and so on.
- Color Options: Black or White.
-
- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
