No products were found matching your selection.
Other Related Products
-
- Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color: white or natural PE foam
- Material: closed-cell PE foam carrier
- Adhesive: acrylic adhesive coated on both sides
- Liner: glassine paper, PE coated paper, or film liner
- Use: mounting pads, trims, panels, nameplates, glass bonding
-
An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
-
- Material: Closed-cell EVA foam with pressure-sensitive adhesive
- Common Thickness: 1 mm, 2 mm, 3 mm, 5 mm, or made-to-size thickness
- Color Options: Black, white, gray, or customized color
- Adhesive: Rubber, hot melt, or acrylic adhesive by surface requirement
- Supply Form: Slit rolls, foam strips, die-cut pads, or shaped pieces
- Main Use: Cushioning, shock absorption, edge protection, and packaging protection
-
- Material: Closed cell neoprene sponge foam
- Color: Black, other colors on request
- Thickness: 1 mm-40 mm typical custom range
- Width: Slit to roll, strip, or gasket size
- Adhesive: Acrylic PSA or rubber PSA backing
- Format: Plain strip, adhesive-backed, die-cut, kiss-cut
-
- Common Size: 48 mm x 25 m, 50 mm x 25 m, slit widths available
- Color: White cloth tape with paper or film release liner
- Backing: Cotton/polyester woven cloth backing
- Adhesive: Double-sided rubber pressure-sensitive adhesive
- Thickness: 280-420 um typical total thickness
- Use: Exhibition carpet, event carpet, entrance mats, rough surface fixing
-
Double sided tape for window insulation is used when a window assembly needs film mounting, frame air sealing, glazing contact support, or temporary seasonal protection. The right choice is not based on adhesive strength alone. It depends on the frame surface, coating condition, gap depth, film tension, temperature, humidity, sunlight exposure, service time, and removal method. PVC, painted wood, aluminium, glass, and powder-coated frames can react differently after pressure and dwell time. Safer use starts with checking tape structure, adhesive behavior, foam compression, peel response, edge stability, and residue risk on the real window surface before repeated use.
-
- Jumbo width: 1020 mm or 1240 mm common parent roll
- Color: White liner, kraft liner, clear or milky adhesive layer
- Structure: Tissue, PET film, PE foam, EVA foam, or supported film
- Adhesive: Acrylic, modified acrylic, hot melt, or solvent acrylic
- Thickness: 80 um-300 um typical selection
- Processing: Slitting, rewinding, lamination, kiss cutting, die cutting
-
- Common thickness:1 mm-10 mm
- Color options:Black, grey, white
- Foam materials:SBR, EPDM, neoprene-style rubber foam
- Structure:Closed cell, sealed-cell sponge rubber
- Format:Rolls, strips, adhesive backed parts, die-cut gaskets
- Use:Door, window, cabinet, panel, and metal enclosure sealing
-
- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
