No products were found matching your selection.
Other Related Products
-


- Width: 1/2 inch, 3/4 inch, 1 inch
- Length: 7.5 ft, 15 ft, bulk roll
- Color: black or dark gray
- Material: heat-resistant fiber
- Backing: self adhesive liner
- Use: grill lid and door seal
-


- Common Sizes: 15cm x 20m, 20cm x 50m, 30cm x 100m, 500ft
- Color: White, green, black, or project-based backing color
- Backing: PET nonwoven, PP cloth, or composite fabric
- Adhesive Side: Self-adhesive or glue-compatible seam carrier
- Use Area: Commercial turf, sports field, large landscape turf
- Key Focus: Seam strength, roll flatness, water resistance
-

An EPDM sponge data sheet links material values to defined test conditions. For closed-cell EPDM used as sheet, sealing strip, gasket stock, or adhesive-backed material, the main checks are compression behavior, recovery, density, hardness, mechanical strength, environmental exposure, and surface bonding. Reference data support screening; project limits require representative sample testing under intended service conditions.
-


- Material: Nitrile rubber elastomeric closed-cell foam
- Thickness: 3mm / 6mm
- Color: Black
- Backing: Self-adhesive with release liner
- Typical Density: 55-75 kg/m3
- Use: Pipes, valves, elbows, ducting, refrigeration fittings
-


- Jumbo width: 1020 mm or 1240 mm common parent roll
- Color: White liner, kraft liner, clear or milky adhesive layer
- Structure: Tissue, PET film, PE foam, EVA foam, or supported film
- Adhesive: Acrylic, modified acrylic, hot melt, or solvent acrylic
- Thickness: 80 um-300 um typical selection
- Processing: Slitting, rewinding, lamination, kiss cutting, die cutting
-


- Material: Closed cell neoprene sponge foam
- Color: Black, other colors on request
- Thickness: 1 mm-40 mm typical custom range
- Width: Slit to roll, strip, or gasket size
- Adhesive: Acrylic PSA or rubber PSA backing
- Format: Plain strip, adhesive-backed, die-cut, kiss-cut
-


- Material: Closed cell PVC foam
- Color: Black, grey, white, or custom
- Thickness: 1 mm-15 mm typical
- Width: 5 mm-1000 mm slit rolls
- Adhesive: Single sided acrylic PSA
- Use: Frame,cabinet, and equipment gap sealing
-


- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-


- Thickness: 1 mm, 2 mm, 3 mm, 4 mm, 6 mm
- Width: 9 mm, 10 mm, 12 mm, 15 mm, slit to size
- Color: black or white foam
- Carrier: high-density PVC foam or closed-cell PE foam
- Adhesive: double-sided acrylic PSA
- Use: security glazing bars, sash windows, glass-to-frame sealing