No products were found matching your selection.
Other Related Products
-


- Width: 1/2 inch, 3/4 inch, 1 inch
- Length: 7.5 ft, 15 ft, bulk roll
- Color: black or dark gray
- Material: heat-resistant fiber
- Backing: self adhesive liner
- Use: grill lid and door seal
-


- Common thickness: 5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm
- Color: white or natural PE foam
- Material: closed-cell PE foam carrier
- Adhesive: acrylic adhesive coated on both sides
- Liner: glassine paper, PE coated paper, or film liner
- Use: mounting pads, trims, panels, nameplates, glass bonding
-


- Material: Polyurethane with nano glue.
- Thickness: The rug tape for rugs on wood floors is very thin, like 1 mm.
- Customization: Customize your own shape and size, such as Round、Triangular and so on.
- Color Options: Black or White.
-


- Jumbo roll size: 1020 mm usable width, 100 m-300 m length
- Colors: black, white, or project-based foam color
- Material: closed-cell high-density PE foam carrier
- Adhesive: high-tack acrylic or modified solvent acrylic PSA
- Thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Uses: trim mounting, panel bonding, die-cut pads, rough surface fixing
-


- Width: 90 mm / 100 mm
- Length: 20 m / 25 m / 50 m
- Adhesive: Heat activated hot melt
- Reinforcement: Centered fiberglass scrim
- Backing: Kraft paper with release paper
- Check Points: Width, coating, slitting edge
-


- Material: non-woven tissue carrier with acrylic pressure-sensitive adhesive.
- Structure: double coated acrylic tissue tape with release liner protection.
- Thickness: 0.09-0.18 mm typical options.
- Color: translucent white or milky white, depending on liner and adhesive grade.
- Adhesive coat weight: 35-90 g/m2 per side, balanced for peel and shear.
- Uses: foam lamination, nameplate bonding, PET/PC/ABS film mounting, and die-cut parts.
-


- Material: Closed cell neoprene sponge foam
- Color: Black, other colors on request
- Thickness: 1 mm-40 mm typical custom range
- Width: Slit to roll, strip, or gasket size
- Adhesive: Acrylic PSA or rubber PSA backing
- Format: Plain strip, adhesive-backed, die-cut, kiss-cut
-


- Color: Clear, made for a low-visibility adhesive line
- Carrier: Transparent PET / polyester film
- Adhesive: Double coated acrylic adhesive
- Common Thickness: 0.05 mm-0.20 mm
- Liner Options: PET film, glassine paper, PE coated paper
- Format: Jumbo roll, slit roll, sheet, kiss-cut or die-cut partDouble Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
Double Seal Tape Company is a manufacturer of Double Coated Polyester Clear Tape for clear panel bonding, transparent lamination, and low-visibility flat-surface assembly. Built with a transparent polyester carrier and evenly coated acrylic adhesive on both sides, this tape is suitable for bonding glass, acrylic, PC, PET film, stainless steel, and aluminum parts where a thin, neat adhesive line is required. It is produced for applications that need clean liner release, stable die-cutting, controlled thickness, and a better final visual appearance.
-


- Material: Nitrile rubber elastomeric closed-cell foam
- Thickness: 3mm / 6mm
- Color: Black
- Backing: Self-adhesive with release liner
- Typical Density: 55-75 kg/m3
- Use: Pipes, valves, elbows, ducting, refrigeration fittings